NDT Reporting and Database Design Services

Conveyor belt reports can be updated with automated trend lines and other predictive tools through our NDT Reporting and Database Design Services.

Fig 1. The above animation highlights changes in thickness readings over time.

Fig 2. The above animation highlights changes in a thickness profile over time at specific dates. The individual thickness readings are shown in Fig. 1.

Fig 3. The above animation highlights thickness readings in a typical grid pattern. The red squares highlight the lowest readings. The green squares represent the averages for the rows and columns.

Fig 4. The above report section is taken from an ultrasonic weld inspection report. The weld locations are illustrated in the green section. In this case all the welds were the T-Butt type and tested in accordance with AS 2207 UMC test procedure.